Sometimes as slow as hand-sewing, or, as fast as you can run the machine.Īlright…let’s get to what you’ll need to do.
This pushes the fabric up against the presser-foot, and shoves it back, out of the machine.Īfter those five steps, the whole process repeats again. The feed-dogs perform a four-motion movement. This pulls the stitch tight and closes the loop.ĥ. At the top of the machine, the thread take-up lever jerks upwards. The loop of thread passes over and around the shuttle or the hook, which pulls the bottom thread through the loop as it goes along.Ĥ. The nose of the shuttle or the swinging hook, catches the loop of thread left by the upper needle.ģ. The transverse shuttle/vibrating shuttle/rotating hook/oscilating hook (dependent on machine’s age and design) swings around. As the needle rises up, it leaves a small loop of thread on the underside of the fabric.Ģ. The needle descends and pierces the fabric. Having prepared the machine for sewing, the following actions occur:ġ. I figured I’d do a bit about this first, since it might bear importance later on.īe they 100 years old, 150 years old, 50 years old, or brand new, all sewing-machines operate in the same basic manner.
The information pertaining to sewing-machines as mentioned in this posting is strictly for older machines which are mechanically driven, and not those which are generally, post-1960s, which tend to be operated more via electronics and computerised systems instead of cranks, levers, cams and pistons. I have serviced vintage and antique sewing-machines as a hobby, and have restored some for friends and family. This is merely a small side-hobby of mine but everything written hereafter, has been done so with the backing of research and experience gained from practice. I figured I’d write up a posting here, to answer that question in greater detail.ĭisclaimer etc: I am not a qualified, certified, expert, professional, master machine-repairman by any stretch of fact, fiction or the most rabid and erratic of imaginations.
#Singer red eye sewing machine side plate how to
Since posting my first sewing-machine piece here on my blog, I’ve received a comment asking for tips and tricks on how to service, clean and oil these machines.
0 kommentar(er)
